repeat">
Rajguru Steel Industries
Girgaon, Mumbai, Maharashtra
GST No. 27AADPJ4786F1ZK
08048964852 89% Response Rate
Send E-mail

Monel Products

Monel Alloys are a nickel-copper alloy with high strength and excellent corrosion resistance in a range of media including sea water, hydrofluoric acid, sulfuric acid, and alkalies. Used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, fittings, fasteners, and heat exchangers. Rajguru Steel supplies Monel 400, K-500 & R-405. Most of these grades are available in the form of plate, sheet, pipe, tubing, fittings, bar, wire and rod.
Request CallBack
Monel Tube / Pipe
Get Best Quote

Monel Tube / Pipe

Approx. Price: Rs 1,600 / KgGet Latest Price
Product Details:
MaterialMonel
ApplicationOil Tube, Gas Tube, Fluid Tube, Boiler Tube, Heat exchanger Tube
ASTM B163 Alloy 400 Seamless Tube Size3.35 mm OD To 101.6 mm OD
ASTM B163 Alloy 400 Welded Tube Size3.35 mm OD To 101.6 mm OD
StandardASTM B163/ ASME SB163, ASTM B730/ ASME SB730 UNS 4400 Tubing
ASTM B730 Monel 400 Tubing Swg & Bwg10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg.
Form'U' bent, Hollow, Hydraulic, LSAW, Boiler, Straight Tube, Tube Coil, Round, Rectangular, Square, etc
TypesSeamless, ERW, EFW, Welded, Fabricated Tube / Tubing
We are leading suppliers of Monel Sheets in Mumbai. We deliver all over India. We provide quality products to our customers. 

Monel alloy 400 high tolerance tubing has excellent resistance in the presence of flowing seawater or brine as well a rapidly flowing brackish water. Which is why the Monel 400 tube is almost extensively used in applications involving the marine industry.

At acids modest temperatures and concentrations, the 400 Monel Heat Exchanger Tube is able to offer some resistance to hydrochloric acid and sulfuric acid although the alloy is seldom considered to be the ideal choice of material for those applications which contain these acids. 
The monel 400 seamless tube also demonstrates High resistance to alkalis as well. Since the Monel 400 Sanitary Tube has a higher content of copper, Monel 400 is rapidly attacked in the presence of nitric acid and ammonia in the piping systems.The Monel 400 Electropolish Tube is one of the few alloys which can be used at extreme temperature settings. This is because the Monel 400 Decorative Tube, exhibits good mechanical properties from sub-zero temperatures right up to an elevated temperature of about 1020° F.

Yes! I am Interested
Request CallBack
Monel K500 Pipes/Tubes
Get Best Quote

Monel K500 Pipes/Tubes

Approx. Price: Rs 1,385 / KgGet Latest Price
Product Details:
MaterialMonel
GradeMonel K500
Size5 mm To 500 mm
Diameter0.1 mm to 100 mm
ToleranceH8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients' requirements
FormRound, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging, etc.
Length100 mm To 3000 mm Long & Above
SpecificationsASTM B164 / ASTM SB164
FinishBlack, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
We are leading suppliers of MonelK500 & Monel 400 bars in Mumbai. We deliver all over India. We provide quality products to our customers. 

Yes! I am Interested
Request CallBack
Monel K500 Round Bars
Get Best Quote

Monel K500 Round Bars

Approx. Price: Rs 1,200 / KgGet Latest Price
Product Details:
Minimum Order Quantity50 Kg
ShapeRound
MaterialMonel K500 Round Bar
Material GradeMOnel K500
Usage/ApplicationIndustrial
Diameter10 mm to 100 mm
Tensile Strength3 to 6 m (Custom cut length)
FormRound, Square, Hex, Rectangle, Billet, Ingot, etc.
We are leading suppliers of MonelK500 wire in Mumbai. We deliver all over India. We provide quality products to our customers. 

Monel K500 bar brings characteristics similar to Monel Alloy 400 in respect to corrosion resistance, however, offers higher yield and tensile strength. Having characteristics of high corrosion resistance, K-500 is an ideal alloy for use in marine environments when the need for constant contact with salt water comes into play.


Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
Monel 400 Round Bar
Get Best Quote

Monel 400 Round Bar

Approx. Price: Rs 1,295 / KgGet Latest Price
Product Details:
BrandJindal
ShapeRound
MaterialMonel 400
Material GradeMonel 400
Usage/ApplicationManufacturing
GradeMonel 400 (UNS N04400, Nickel Alloy 400 (66 Ni/34 Cu))
FinishingBright, Polish & Black
FormSquare, Round, Hex, Flat - In Black & Bright Finish
StandardASTM B164 / ASME SB164
SurfaceBright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline
DimensionsRound Bar - 3 to 800 mm | Hex Bar - 2 to 100 mm A/F | Flat Bar Thickness - 2 to 100 mm
Widely used across different industries, we are one of the leading suppliers all over India from South Mumbai. We deliver quality products only.

This alloy is excellently exhibiting good acid and alkaline resistance ability. Also, it is having good tensile strength, ductility, excellent thermal conductivity and can be hardened through the cold working. Also, it can be used at those applications where temperature ranges from sub-zero to 538 Deg C.

Yes! I am Interested
Request CallBack
400 Monel Pipe
Ask For Price

400 Monel Pipe

Product Price : Get Latest Price
Product Details:
ColorSilver, Copper, Black
Brandjindal
Size/diameter2 inch,3 inch,1/2 inch,1 inch,4 inch
Single piece length3 meter,6 meter
Thickness10mm, 15mm, 20mm, 25mm, 30mm, 40mm, 50mm

Our team of dedicated professionals offers Monel 400 to the esteemed customers. It is available in different specifications and is highly appreciated for its durability, abrasion resistant and long service life. These pipes are precisely manufactured using premium quality raw material that is sourced from known and trusted dealers. In addition to this, it is easy to afford and is ASTM / ASME SB 163 / 165 UNS 4400.

 

Features-

 

  • Smooth edges
  • Fine finish
  • Customizable

Specification:

  • Material : Monel 400
  • Product Form : Finished or blank
  • Model Number : Monel 400 Pipe

Yes! I am Interested
Request CallBack
Stainless Steel Oval Single Slot Tubes
Ask For Price

Stainless Steel Oval Single Slot Tubes

Product Price : Get Latest Price
Product Details:
TypeSeamless, Welded
Length2-4 meters, 0-2 meters, 4-6 meters
GradeSS304, SS316
Size2''-3'', 1/4''-1'', 1''-2'', 3''-10''
Hallow SectionsSquare, Rectangular, Elliptical, Circular
Grade:

  • AISI 304, 316

Length:

  • 6M ( Client''s request lengths suppl liable )

Finish:

  • Non-Polished
  • 240~600 Grit
  • Mirror Finish
  • Titanium Finish

Specifications:
OVAL SINGLE SLOTTED TUBE
OUTSIDE DIAMETER"U" CHANNEL
( SLOT SIZE )
80 X 40 mm26 X 33 mm
110 X 40 mm26 X 33 mm

Remarks:

  • Special cut length available
  • Further bending ( bend to various curve/radius available )
  • Easy to fabricating

Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
Monel Round Bar
Get Best Quote

Monel Round Bar

Approx. Price: Rs 1,500 / KGGet Latest Price
Product Details:
Minimum Order Quantity50 KG
FinishGlossy, Matte
Length3 Meter, 6 Meter
Rajguru Steel offer monel round bars are highly long lasting and corrosion resistant. In order to meet the requirments of our domestic and world wide clients, they come in option of varied dimensions, lengths and thickness. Our range of monel round bars are available in different grades.We perform several tests to examine the quality and preciseness of these monel round bars. We offer cut piece in round bar as per clients demand.

Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
  • Production Capacity: 50
  • Delivery Time: 5 Days
Yes! I am Interested
Request CallBack
500 Monel Round Bar
Ask For Price

500 Monel Round Bar

Product Price : Get Latest Price
Product Details:
MaterialStainless Steel, Cast Iron, Aluminium
FinishGlossy, Matte
UsageManufacturing
In line with clients' diverse requirements across the country, we are offering an excellent range of Monel 500 Round Bar. Our offered products are manufactured from the steel & contemporary techniques in fulfillment with the set norms. We are offering these products to customers on numerous specifications as per the needs of customers. Furthermore, our products are inspected against numerous parameters to eradicate any flaw from the entire range.

Features:

  • No rough edges
  • Durability
  • Corrosion resistance

Specification:

  • Application: Aerospace field,Nuclear field,Chemical processing field
  • Grade: Monel 500
  • Brand Name: Baosteel

Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
Yes! I am Interested
Request CallBack
Monel Butt Weld Fittings
Get Best Quote

Monel Butt Weld Fittings

Approx. Price: Rs 50 / PieceGet Latest Price
Product Details:
Minimum Order Quantity50 Piece
SizeSeamless Butt Weld Fittings : 1/2" - 10" | Welded Butt Weld Fittings : 1/2" - 48"
ApplicationStructure Pipe
TypeSeamless / ERW / Welded / Fabricated
Wall Thickness20 Swg., 18 Swg., 16 Swg., 14 Swg., 12 Swg., 10 Swg., & Sch. 10, Sch. 40, Sch. 80 etc.
Rate Pressure400 Grade - 75 to 90 ksi & K500 Grade - Psi - 1,60,000 , MPa - 1100
Melting Point2370 DegreeF to 2460 DegreeF
With sincerity and hard work of our professionals, we have carved a niche for ourselves in this domain by manufacturing, exporting and supplying Monel Butt Weld Fittings. Offered fitting is checked on several parameters in order to ensure its excellence. The fitting offered by us is expertly constructed from the high quality of stainless steel as per the set standards of industry. This fitting is obtainable in the diverse specifications to meet the specific demand of the applications.

Features:

  • Robustness
  • Resistance to adverse weather conditions
  • Accurate in dimension


Specification:

 

  • Material: Inconel, Nickel, Monel, Hastelloy
  • Connection: Welding
  • Technics: Forged
  • Shape: Equal

    Additional Information:
    • Pay Mode Terms: T/T (Bank Transfer)
    • Port of Dispatch: Mumbai
    • Production Capacity: 100 Kg
    • Delivery Time: 5 Days
    Yes! I am Interested
    Save time! Get the Best Deal

    *Your information is safe with us.

    Request CallBack
    Monel K500 Plate / Sheet
    Get Best Quote

    Monel K500 Plate / Sheet

    Approx. Price: Rs 1,385 / KgGet Latest Price
    Product Details:
    Material GradeK500
    FormPlate
    GradeK500 (UNS N05500 / QQ-N-286 / Werkstoff Nr 2.4375)
    MaterialMonel
    Thickness0.1mm to 12 mm thick
    FinishingSmooth
    Size1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
    Melting Point1350 degrees Celsius
    Tensile StrengthMin. 550 MPa
    We are leading suppliers of MonelK500 Plate in Mumbai. We deliver all over India. We provide quality products to our customers.

    These Monel K500 Plates are used for sea water impellers and pump shafts, in addition to being used in the oil well industries for valve trim and other parts. 

    Yes! I am Interested
    Request CallBack
    Monel 400 Plate/Sheets
    Get Best Quote

    Monel 400 Plate/Sheets

    Approx. Price: Rs 1,385 / KgGet Latest Price
    Product Details:
    Material Grade400
    FormSolid plate
    Grade400
    MaterialMonel
    ThicknessCustomized
    FinishingSmooth
    Country of OriginMade in India
    Widely used across different industries, we are one of the leading suppliers all over India from South Mumbai. We deliver quality products only

    Yes! I am Interested
    Request CallBack
    Monel 400 Flanges
    Get Best Quote

    Monel 400 Flanges

    Approx. Price: Rs 235 / PieceGet Latest Price
    Product Details:
    Size1/8" NB TO 48"NB.
    Grade400
    Material StandardUNS N04400, ASME SB-564 & ASTM B564
    Usage/ApplicationIndustrial
    Product TypeFlange
    Rated Pressure150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64
    Temperature Deg CelsiusMelting Point - 1350 DegreeC (2460 DegreeF)
    Tensile Strength MpaPsi - 80000 , MPa - 550
    Country of OriginMade in India
    Widely used across different industries, we are one of the leading suppliers all over India from South Mumbai. Monel Alloy 400 Flanges are also referred by WNR 2.4360 & UNS N04400. These Alloy 400 Flanges can be machined at reasonable rates by means of machine tools.

    We do deal in Blind Flanges, Orifice Flanges & Weld Neck Flanges. We deliver quality products only.

    Yes! I am Interested
    Save time! Get the Best Deal

    *Your information is safe with us.

    Request CallBack
    Monel K500 Wire
    Get Best Quote

    Monel K500 Wire

    Approx. Price: Rs 1,200 / KgGet Latest Price
    Product Details:
    MaterialMonel
    Usage/ApplicationIndustrial
    ThicknessCustomized
    Highest TemperatureMelting Point - 1350 DegreeC
    Industry ApplicationPump, Shafts, Fasteners, Marine Propeller Shafts, Oil Well Tools, Instruments Springs, etc.
    ConditionAnnealed / Annealed + Aged / Spring Temper / Spring Temper + Aged
    SpecificationsASME SB-865 / AMS 4676 / QQ N 286
    We are leading suppliers of MonelK500 wire in Mumbai. We deliver all over India. We provide quality products to our customers.

    Monel K500 wire exhibits low corrosion rates in high velocity seawater, similar to Monel 400. Monel K500 wire is also resistant to sour gas environments. 
    Applications inc. - Chains and cables, Pump components, Marine instruments, Doctor blades and scrapers for pulp and paper production, Shafts, Electronic components, Springs, etc.

    Yes! I am Interested
    Request CallBack
    Monel K500 Flanges
    Get Best Quote

    Monel K500 Flanges

    Approx. Price: Rs 300 / PieceGet Latest Price
    Product Details:
    Size1/2" (15 NB) to 48" (1200NB) DN10~DN5000
    GradeK500
    Material StandardK500
    Usage/ApplicationIndustrial
    Product TypeMonel Flange
    Temperature Deg CelsiusMelting Point - 1350 DegreeC (2460 DegreeF)
    Tensile Strength MpaPsi - 160000 / MPa - 1100
    Application IndustryPharma Equipment, Chemical Equipment, Sea Water Equipment, Off-Shore Oil Drilling, Power, etc.
    SpecificationsASTM B564 / ASTM SB 564
    Density8.44 g/cm3
    Flange Face TypeFlate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
    Country of OriginMade in India
    We are leading suppliers of MonelK500 Flanges in Mumbai. We deliver all over India. We provide quality products to our customers.

    Monel K500 Flanges have excellent resistance against corrosive materials and solutions like oxidizing salt, acids, nitrates, and other oxidizing agents. Also, it offers superior strength and hardness to finished product. 

    These flanges are available in diverse sizes, shapes, types, and dimensions after performing testing for pitting, stress corrosion cracking, and inter-granular corrosion. 
    Few of K500 Flanges inc. - Monel K500 Blind Flange, Monel K500 Lap Joint Flange, Monel K500 Weld Neck Flanges, etc.

    Yes! I am Interested
    Request CallBack
    Monel 400 Wire
    Get Best Quote

    Monel 400 Wire

    Approx. Price: Rs 1,485 / KgGet Latest Price
    Product Details:
    MaterialMonel
    Usage/ApplicationIndustrial
    ThicknessCustomized - 0.0004" to 0.040" - 10 microns to 1 mm & 1 mm to 100 mm Other Sizes on Request
    ShapeCoil
    LengthCustomized - Cut Lengths: 0.125" to 72"
    FormFiller Wire, Coil Wire, Electrode Wire, Welding Wire.
    Packaging TypeSpool, Reel, Coil, Bobbin, Carrier & Custom packaging provided from as low as 1lb to 200lb plastic.
    Wire Density8.89 g/cm3
    SurfacePolished bright, Smooth, Bare, Enamel, PTFE, Ceramic, Plated
    StandardASTM B164 / ASME SB164 AMS 5514
    Country of OriginMade in India
    Widely used across different industries, we are one of the leading suppliers all over India from South Mumbai. We deliver quality products only.

    Monel 400 Wire is generally being used when specifications call for corrosion resistance and high – temperature service properties. This Monel 400 Coil Wire can also be used in sub – zero applications as low as the temperature of liquid oxygen, helium, or nitrogen.

    With their joint strength and resistance to corrosion, this nickel brazing Monel 400 Electrode is ideal for jet engine parts and assemblies, food handling equipment, nuclear energy and carbide tools. 

    Some of the typical applications of Monel 400 Wire is in Marine Engineering, Chemical Processing, Hydro-carbon Processing, Heat Exchangers, Valves, Pumps, etc.

    Yes! I am Interested
    Save time! Get the Best Deal

    *Your information is safe with us.

    Request CallBack
    Monel 400 Fittings
    Get Best Quote

    Monel 400 Fittings

    Approx. Price: Rs 490 / PieceGet Latest Price
    Product Details:
    Minimum Order Quantity50 Piece
    BrandMonel 400
    GradeMonel Alloy 400,UNS N04400
    SizeSeamless 1/2" - 10", Welded 1/2" - 48"
    Usage/ApplicationOil & Gas, Heat Exchangers, Aerospace, Pharmaceutical, Defense, Chemical
    MaterialNickel-Copper Alloy
    Material GradeMonel 400
    Working Temperatureup to 1000 DegreeF
    Thickness2 to 40 mm
    WeightVaries as per the type & size of fitting.
    Rated PressureVaries as per the type & size of fitting.
    DimensionsASME/ANSI B16.9,ASME B16.28,MSS-SP-43
    Temperature ResistantYes
    StandardASTM B366 / ASME SB366
    Manufacturing TypeSeamless/ Welded
    Widely used across different industries, we are one of the leading suppliers all over India from South Mumbai.

    Monel 400 Pipe Fittings are extremely resistant to stress corrosion cracking in most freshwaters. High temperature (up to 1000 °F) has no effect on this alloy and it also has excellent mechanical properties at subzero temperatures.

    Some of the Monel 400 Fittings inc. - Monel 400 Elbow, Monel 400 Tee, Monel 400 Cross, Monel 400 Reducer, Monel 400 Stub End, Monel 400 Pipe Cap, Monel 400 Nipple, Monel 400 Bend.

    These Monel 400 fittings (High corrosion Alloy material) are used in Oil & Gas, Heat Exchangers, Aerospace, Pharmaceutical, Defense, Electrical and electronic parts, Chemical shipping drums and other industries.


    Yes! I am Interested
    Request CallBack
    Monel Fasteners
    Get Best Quote

    Monel Fasteners

    Approx. Price: Rs 39 / PieceGet Latest Price
    Product Details:
    TypeSquare, Hex, Oval, Triangular, Knurled, etc.
    SizeM2 to M150
    Quantity Per Pack100
    ColorSilver, Grey, F=Gold, Black
    MaterialAluminium,brass,carbon steel,iron
    Surface finishElectroplated,galvanized

    We are among the reliable and prominent manufacturer, supplier, distributor and exporter of excellent quality Monel Fasteners. Our Monel Fasteners are demanded for its excellent quality, high efficiency and superior functionality ideal for railings, ladders, gates and welding applications. Our Monel Fasteners are made from superior quality raw materials which are reliable and consisting high durability. These Monel Fasteners provide best flux adhesion, superior strength, rust proof ability and high resistance to temperature. We provide our strong and durable Monel Fasteners at very reasonable range of prices.

     

    Features:

     

    • Excellent flux adhesion
    • Superior strength
    • Rust proof
    • High thermal resistance

     

    Specification:

    • Brand Name : Monel
    • Type : Bolts

     


    Yes! I am Interested
    Request CallBack
    Monel Forged Fittings
    Get Best Quote

    Monel Forged Fittings

    Approx. Price: Rs 1,400 / PieceGet Latest Price
    Product Details:
    Minimum Order Quantity1 Piece
    Size1/8" NB to 4" NB, 3/4 inch, 3 inch, 2 inch, 1 inch, 1/2 inch
    ApplicationStructure Pipe, Gas Pipe, Chemical Industry, Petrochemical industry, Marine & Power, Transmission industry, Power plants., Hydraulic Pipe
    Material GradeMonel 400 & Monel K500
    ShapeAs per fitting type
    FormSocketweld Elbow, Forged Tee, Forged Cross, Full Coupling, Half Coupling, End Cap, Threaded Union.
    Port Of DispatchAs per destination requirement
    Pressure RatingThreaded End - 2000 /3000/ 6000 LBS & Socket-weld End - 3000 / 6000/ 9000 LBS.
    SpecificationsASTM B564 / ASME SB564
    TypeSocketweld Fittings, Screwed-Threaded Fittings (NPT or PT Type)
    We have emerged as the foremost manufacturer, exporter and supplier of optimum quality Monel Forged Fittings. The provided fitting is manufactured following the set norms of industry using finest quality stainless steel & latest techniques. Our offered fitting is distinguished among customers for its high strength and durability. This fitting is accessible in various thickness and dimensions to meet requisites of customers.

    Features:

    • Smooth finish
    • Rust proof
    • Reliability

    We offer a variety of these forged fittings in numerous grades, shapes, dimensions, size and specifications. Monel grade is a combination of copper and nickel. It offers excellent strength and corrosion resistance properties. It is extensively suitable for has outstanding anti-corrosive properties to both seawater and steam. Monel Forged Fittings are entirely reliable for absolute zero temperature applications. We provide best suitable Monel Forged Fittings with numerous features such as high durability, good ductility, excellent thermal stability, high corrosion resistance, robust construction and long-lasting life. These fittings exhibit excellent resistance towards harsh chemical environments such as alkalis and acid.


    Yes! I am Interested
    Save time! Get the Best Deal

    *Your information is safe with us.

    Request CallBack
    Monel Fastener
    Get Best Quote

    Monel Fastener

    Approx. Price: Rs 30 / PieceGet Latest Price
    Product Details:
    MaterialMonel
    GradeAlloy 400 Fasteners & Alloy K500 Fasteners
    Nut TypesMonel Coupling Nut, Hex Head Nut, Wing Nut, Square Nut, Panel Nut, T Nut, Acorn Nuts, Dome Nut, etc.
    Screw TypesMonel Threaded Screw, Hex Head Screw, Socket Head Screw, Socket Set Screw, Blind Rivet, anchor screw
    Washer TypesMonel Lock Washer, Machine Washers, Star Washers, Sealing Washer, Split Washer etc.
    SpecificationsASTM B865-04 / ASME SB865-04, ASTM B467 / ASME SB467
    Length3 mm to 200 mm
    Bolt TypesMonel Hex Head Bolt, Hex Bolt, Square Bolt, Eye Bolt, T Bolt, U Bolt, Lag Bolt, Counter sunk Bolt.
    FormSquare, Round, Threading as per Gauge, Round, etc.
    Stud TypesMonel Double Ended Studs, Threaded Tod, Tie Bars, Tie Rods, etc.
    Nut SizeM3 - M56 | 3/6" to 2" | Customer Sizes
    Bolt/ Screw SizeM3 - M56 | 3/6" to 2" | Customer Sizes
    Washer SizeM3 - M56 | 3/6" to 2" | Customer Sizes
    Widely used across different industries, we are one of the leading suppliers all over India from South Mumbai.

    There are a number of types of Monel, all of which contain up to 67% nickel – with some types containing iron, manganese, carbon or silicon. In some types, additions of aluminium and titanium increase strength.

    There are a number of pros to using Monel fasteners, such as high corrosion resistance to acids and alkalis, a high mechanical strength, it’s ease of shaping and forming, as well as a relatively low cost alongside attractive appearance and finishes.

    Both Monel 400 and Monel K500 are used in a variety of applications. Monel Fasteners are used in marine applications, gasoline tanks, water tanks, and underwater projects and is used in shackle seizures in recreational boating. It is also used as the material for valves in some high quality musical instruments, including French horns, tubas, euphoniums, and other members of the brass family. 


    Yes! I am Interested
    Request CallBack
    Monel Flange
    Get Best Quote

    Monel Flange

    Approx. Price: Rs 230 / PieceGet Latest Price
    Product Details:
    Size1/8" NB to 48" NB
    Product TypeMonel Flange
    Rated Pressure150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS , ASA 150#, ASA 300# DIN ND 6,10,16,25,40 etc
    SpecificationsUNS N04400 / ASME SB-564
    TypeSORF, Weld Neck, Blind, Threaded Flanges, Socket weld, Lap Joint, Orifice, Ring Type, Long Weld Neck
    Connect TypeFlat Face, Raised Face, Ring Type Joint
    Widely used across different industries, we are one of the leading suppliers all over India from South Mumbai.

    Monel 400 exhibits high strength, excellent resistance to acidic and alkaline environments, and good ductility and thermal conductivity. This alloy maintains its properties and performance in temps ranging from subzero to 1,000°F (538°C). Monel 400 can be hardened only via cold-working.


    Yes! I am Interested
    Request CallBack
    Monel Fittings
    Get Best Quote

    Monel Fittings

    Approx. Price: Rs 1,400 / KgGet Latest Price
    Product Details:
    GradeAlloy 400 / Monel 400 / UNS N04400 / 2.4360, Alloy K-500 / Monel K-500 / UNS N05500 / 2.4361
    Size1/2"NB to 24"NB in Sch 10s, 40s, 80s, 160s, XXS.
    MaterialMonel
    Rated Pressure2000 LBS, 3000 LBS, 6000 LBS and 9000 LBS
    Form90 Degree Elbows, 45 Degree Elbows, Street Elbows, Tee, Cross, Couplings, Reducers, Inserts, Couplings, Caps.
    SpecificationsASTM B366, ASME B366, ASTM B564, ASME SB564, ASTM B865, ASME SB865
    We are leading suppliers of MonelK500 wire in Mumbai. We deliver all over India. We provide quality products to our customers.

    Some of the Monel Fittings inc. - Pipe Fittings, Butt Weld Fittings, Forged Fittings, Socket Weld Fittings, Threaded Fittings, Flange, etc.

    Yes! I am Interested
    Save time! Get the Best Deal

    *Your information is safe with us.

    Request CallBack
    Monel K500 Fittings
    Get Best Quote

    Monel K500 Fittings

    Approx. Price: Rs 350 / PieceGet Latest Price
    Product Details:
    GradeMonel K500
    SizeSeamless Butt Weld Fittings: 1/2" - 10", Welded Butt Weld Fittings: 1/2" - 48"
    Usage/ApplicationChemical Fertilizer Pipe
    MaterialMonel K500
    TypePipe Cap, Stub End, Pipe Bend, Cross, Elbow, Reducer, Tee
    Tensile StrengthPsi - 160000 / MPa - 1100
    Density8.44 g/cm3
    Melting PointMelting Point - 1350 DegreeC (2460 DegreeF)
    Industry ApplicationPharma Equipment, Chemical Equipment, Sea Water Equipment, Petrochemical, Power Generation, etc.
    Country of OriginMade in India
    We are leading suppliers of MonelK500 wire in Mumbai. We deliver all over India. We provide quality products to our customers.

    We offer complete range of Monel K500 Pipe Fittings which are superior to Monel 400, regarding strength and hardness, increased through precipitation hardening, thus having a tensile strength of 140,000 psi. Low in permeability,

    These Monel K500 Welded Pipe Fittings are used in oil and gas production units to join multiple pipes, besides offering excellent mechanical features at below zero temperatures.

    Yes! I am Interested

    Explore more products

    X